Model Number: LB-MFP20-#6903
Brand Name: Leadboom
Key Specifications/Special Features:
What is laser marking?"Laser marking" stands for marking or labeling of work pieces and materials with laser beamIn this regard, different processes are distinguished, such as engraving, removing, staining, annealing and foamingDepending on the material and the quality requirement, each of these procedures has its own advantages and disadvantagesWhat materials can be marked with a laser?Metal:
stainless steel, aluminum, gold, silver, titanium, bronze, platinum or copperPlastic:ABS, polycarbonate, polyamide, PMMA or plastics with laser additives
Paints
Foils and films and packaging
Laminates
Depending on the material,different laser typesare used for laser markingBenefits of fiber laser marking
- High-precision marking at constant quality
High precision of laser marking, even very delicate graphics, 1 point fonts and very small geometries will turn out clearly legible
At the same time, marking with the laser ensures constant high-quality results
Laser etching is permanent and at same time resistant to abrasion, heat and acids
Depending on the laser parameter settings, certain materials can also be marked without damaging the surface
Laser marking is one of the fastest marking processes available in the market
This results in high productivity and cost benefits during manufacture
Depending on the material structure and size, different laser sources or laser machines can be used to further increase the speed
- Leadboomlaser machines for laser marking
Leadboom laser offers you wide range of flatbed and galvo laser machines for marking a large variety of materials
Laser marking machine technical parameters
Types: LB-MF10/LB-MF20/LB-MF30
Power: 10/2030W
Beam quality: M2, ≤1.4M2, ≤1.8M2, ≤1.8
Marking speed: ≤7000/≤8000/≤8000mm/s
Power consumption: 0.5/0.8/1.2kW
Fiber laser: AO Q-switch pulse fiber laser
Wavelength: 1064nm
Laser marking software: EzCad.2.1
Working area: 50x50-300x300mm
Minimum line: width 0.01mm
Repeated precision: ±0.001mm
Min characters: 0.15mm
Cooling system: air-cooling
Location system red dot indicator
Power supply: 220V AC/50Hz
Control system: Ezcad motion control card-PC
Dynamic focusing device: yes
Dimensions: 800x680x1200mm